Automatic C Purling

1. Model No: C70-200
Material: cold rolled coil, hot rolled coil, galvanized coil
Yield strength: Q235Mpa, Q345Mpa

2. Machine Components
a) Manual Decoiler 1 set
b) Feeding and Leveling Device 1 set
c) Hydraulic punching and cutting 1 set
d) Rolling forming machine 1 set
e) Post cutting 1 set
f) Product support frame 1 set
g) PLC control system 1 set
Manual Decoiler——>Feed and Leveling Device—–>Pre Punching & Pre-Cutting—> Roller Forming Machine—–> Product support frame

3. Technology Parameters
The weight of the Machine: 6Ton
The total dimension of machine: (length)8.0m x (width)1.4m x (height)1.6m

4. Decoiler
Tightening of coil: By Manual
Weight capacity of decoiler: 5.0T
Inner diameter of decoiler: 380-550mm
Max outer diameter of decoiler: 1600mm

5. Feeding and Leveling Device
It used for making the material flat before feeding into the roll forming machine
11 rollers (five upper and six lower)

6. Rolling Forming System
main motor type: frequency motor
motor power: 15KW
Drive: chain

speed of forming: 8-15m/min
material of roller: Cr12
Motor for width adjusting: 2.25 KW (0.75KW*3)
16 groups rollers
material of main shaft: 40Cr (The main shaft have the high frequency grinding & heat Treatment and the surface of shaft is chroming
diameter of main shaft: ø75-89mm

7. Cutting type: Hydraulic cutting (we have the patent technology, because our post cutting can be adjustable from 70-200mm)
Cutting material: Cr12MoV
Hydraulic motor power: 5.5KW
Hydraulic Pressure: 16Mpa

8. PLC Control System
Voltage: 380V, 3 Phase 50Hz
Size of PLC Control Board (PLC: 700mm(L)x1000mm(H)x300mm(W)
PLC manufacturer: Japan Panasonic
Solenoid valve: Beijing hade
Oil hydraulic cylinder: TAIWEI
Oil pipeline: parkers
Touch Screen manufacturer: Japan Panasonic
Frequency: TAIDA
Encoder: Omron

9. Product support frame
The length of product support frame: 6m